![]() ![]() First, reversing the rotation direction for sanding This is standard on all versions of the 1500 series lathe. Positive locking of the tailstock to the bed of the lathe is done through a top mounted handle. Made from cast iron, the tailstock of this lathe utilizes a large diameter handwheel for the ram advance, a hefty 1-1/4 inch spindle with a #2 morse taper, and a 5/8 inch acme screw. The tool rest itself is fabricated from 3/16 x 3-1/2 inch steel (for a slim cross section) and welded to a 1-1/4 inch shank for excellent rigidity. The tool rest base is a heavy steel weldment which is then surface ground on both sides. The spindle has a #2 morse taper and is through drilledįor spur center extraction and gun drilling if desired. This combination of bearings provide very high end thrust and axial load capacities with essentially zero end play. It is supported i in the cast iron headstock by an oversize 30 MM double row ball bearing on the inboard and a single row 30 MM single row bearing on the outboard side. The 1500s headstock spindle is precision CNC machined from 1-1/4 inch round Has 11 times the vibration absorbing capability of cast iron). Holes are provided at the tailstock end of the machine for filling with concrete or sand if desired. ![]() Yields a very rigid and wide lathe bed for excellent tool rest support. The lathe bed is fabricated from 4 x 3 x 3/16 inch wall structural tube which
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |